wire 2020

“wire” and “Tube” 2020 cancelled. Next Edition of Trade Fairs according to cycle in 2022.

Wire2020_Eingang

Dusseldorf/Germany, October 30, 2020. Following close consultation with both exhibitors and their partners Messe Dusseldorf has had to take the decision to cancel the “wire” and “Tube” trade fairs which were scheduled for December on account of the current Covid-19 infection developments. The next events will be held in their usual in accordance with their cycle once again in Düsseldorf in 2022.

You will find all our preliminary reports with all relevant trade fair news of the industries on this page. In spring and autumn we had already reported in our trade magazines DRAHT and WIRE. Due to the postponement of the fair to the beginning of December 2020, a new hall plan, as well as numerous cancellations of exhibitors, we have asked for the data and information and updated them accordingly under “wire 2020 update”.

The editors of the trade magazines DRAHT and WIRE.

Photo: Messe Düsseldorf / ctillmann

Current reports

Fair-ground.jpg

Next edition of trade fairs to be held in their usual 2022 cycle. © Messe Dusseldorf

 
30/10/2020 – Next edition of the trade fairs to be held in their usual 2022 cycle

Next edition of the trade fairs to be held in their usual 2022 cycle

“wire” and “Tube” 2020 cancelled

Dusseldorf, 30 October 2020. Following close consultation with both, exhibitors and partners, Messe Dusseldorf has had to take the decision of cancelling ... By  Jörg Dambock
Eingang-Nord-hall-89.jpg

“wire” and “Tube” 2020 are cancelled. © Messe Düsseldorf

 
29/10/2020 – wire 2020 update

wire 2020 update

“wire 2020” and “Tube 2020” cancelled

Today, as an industry partner of wire, IWMA has been informed by Messe Dusseldorf that much to their regret, “wire” and “Tube” 2020 have been cancelled. ... By  Jörg Dambock
Schwerer-Einzelblock.jpg

© Kieselstein

 
27/10/2020 – wire 2020 update

wire 2020 update

Smart solutions for strong technology

Kieselstein International GmbH is holding on to participation in the “wire” in December 2020 and hope that it can be held, despite the current developments. ... By  Jörg Dambock
Kabel-CCv-line.jpg

© Maillefer

 
26/10/2020 – wire 2020 update

wire 2020 update

Step into Maillefer’s circle

In view of the current situation, Maillefer has decided to cancel its participation at the “wire” 2020 venue scheduled this December in Düsseldorf. By  Jörg Dambock
Packaging.jpg

© Windak

 
23/10/2020 – wire 2020 update

wire 2020 update

Automated cable packaging equipment

“Windak Group decided to cancel their participation in ‘wire’ 2020”, so Olga Berlinberg, Marketing Manager. By  Jörg Dambock
Spool-winding.jpg

© Gurfil

 
21/10/2020

Cable manufacturers needs film, foils or tapes

Gurfil Foil-Film-Tape+Machinery A.S. told us a new hall and stand number at “wire” 2020. “Hall 13 booth C 64”, so Svetlana Dogusoy, export manager. By  Editorial staff
Querschnitt-Kabel.jpg

Double twist shielding for instrumentation cable. © Roteq

 
20/10/2020 – wire 2020 update

wire 2020 update

Roteq Machinery cancels participation

Roteq Machinery has taken the decision to cancel participation at “wire” 2020 due to the ongoing travel and risks due to the pandemic. By  Jörg Dambock
Kabelmaterial.jpg

© Padanaplast

 
20/10/2020 – wire 2020 update

wire 2020 update

Advanced HFFR compounds for electric powertrain cabling

We’ve been informed that Padanaplast S.r.l. will not be exhibiting at “wire” 2020 in December due to the continuing situation linked to the handling of ... By  Jörg Dambock
Kabelherstellung-.jpg

© Rosendahl Nextrom

 
19/10/2020 – wire 2020 update

wire 2020 update

Increasing bandwidths with core insulation lines

„Rosendahl Nextrom will not exhibiting at ‘wire’ 2020 in December.”, says Anna Jansky,Marketing Coordinator. By  Jörg Dambock
2D-bending.jpg

© Ultimate

 
19/10/2020 – wire 2020 update

wire 2020 update

2D wire forming and welding machines

“Ultimate Automation Ltd is currently commited to exhibiting at the ‘wire’ fair in December,” told us Martin Smith, Sales Director. By  Jörg Dambock
plant.jpg

A new automatic bobbins’ loading system was developed and it allows the operator to weld the wires behind the system and therefore reduce the change-over time. © Flymca

 
19/10/2020 – wire 2020 update

wire 2020 update

New advanced solutions for submarine cable markets

“Flymca/Flyro – Fluidos Y Mecanicas Cantabria S.L. – will not participate in Dusseldorf fair.” told us Maria Lozano, export department. By  Jörg Dambock
COM-CNC-Fortuna-Federn.png

Fortuna Federn will be changing the hall and will be joining Austrian Chamber of Commerce at the Austrian Pavilion with own booth there. © Fortuna Federn

 
16/10/2020 – wire 2020 update

wire 2020 update

Fortuna Federn with smaller booth at „wire“

Fortuna Federn GmbH has decided to be present at the „wire” show only with smaller information booth. Goran Fofonjka and his colleagues will present the ... By  Jörg Dambock
Oil.jpg

Richards Apex made a difficult decision not to attend wire 2020. © Richards Apex

 
16/10/2020 – wire 2020 update

wire 2020 update

Richards Apex not attend “wire 2020“

Due to Covid-19 travel restrictions and overall health concerns, Richards Apex made a difficult decision not to attend wire 2020 after review of available ... By  Jörg Dambock
typ-2a46.jpg

“We don't want to expose anyone to a health risk, which would be unavoidable under the given circumstances.” says Sigrun Möbus. © August Strecker

 
16/10/2020 – wire 2020 update

wire 2020 update

August Strecker has decided not to participate in this year’s “wire”

Due to the still prevailing pandemic, August Strecker has decided not to participate in this year’s “wire” 2020 trade fair in Dusseldorf. By  Jörg Dambock
werk.jpg

© Upcast

 
15/10/2020 – wire 2020 update

wire 2020 update

Continuous upward casting technology and process

The stand of Upcast Oy at “wire” has been moved to another hall. So instead of hall 9 booth C 06 the company will be in hall 13 booth A 73. By  Editorial staff
Absage-wire-2020.png

With a heavy heart Lämneå Bruk has decided to cancel their participation in this year’s “wire” Dusseldorf. © Lämnea Bruk

 
15/10/2020 – wire 2020 update

wire 2020 update

Lämneå Bruk cancels booth at “wire” 2020

“Safety is our main concern”: With a heavy heart Lämneå Bruk has decided to cancel their participation in this year’s “wire” Dusseldorf. By  Jörg Dambock
factory-floor.jpg

© Alloy Wire

 
15/10/2020 – wire 2020 update

wire 2020 update

Advantages of nickel alloys

Alloy Wire International (AWI) Ltd. tell us, that they not exhibiting at “wire” 2020. By  Jörg Dambock
Lager.jpg

© Metalube

 
15/10/2020 – wire 2020 update

wire 2020 update

Lubricants for drawing non-ferrous wire and tubes

The Metalube business was built around the production of lubricants for drawing non-ferrous wire and tubes.Metalube’s “Lubricool”, “Alumol” and “Tubol” ... By  Jörg Dambock
Draht-Coils-Drahtwerkstoffe.jpg

© Trafelerie Sao Paolo

 
14/10/2020 – wire 2020 update

wire 2020 update

Trafilerie San Paolo: Peeled steel in coils up to 42mm

After evaluating the possible scenarios, Trafileria San Paolo has decided not to participate in the „wire“ Dusseldorf 2020 for the first time since its ... By  Jörg Dambock
Madem-Mexico.jpg

© Madem

 
14/10/2020 – wire 2020 update

wire 2020 update

Nailed wooden reels

Madem Group with headquarters in Brazil is one of the leading nailed wooden reels producer in the world. By  Jörg Dambock
Surface.jpg

© Sirio Wire

 
14/10/2020 – wire 2020 update

wire 2020 update

Wire surface treatment lines

The Italian company Sirio Wire srl, specializes in the production of wire surface treatment lines, will not participate to „wire“ Dusseldorf. By  Jörg Dambock
AFES-3D-8T.jpg

© AIM

 
14/10/2020 – wire 2020 update

wire 2020 update

AIM will present the new “AFES-3DxT line”

AIM Inc. is still exhibiting at the same booth and hall number at “wire”. The company will present the new “AFES-3DxT line”: an updated five servo-axis ... By  Jörg Dambock
FFT-Analyse-Screenshot.jpg

© Siebe

 
12/10/2020 – wire 2020 update

wire 2020 update

Making cyclic faults transparent with improved FFT-Analysis

The new “FFT” software tool by Siebe Engineering enables the monitoring of two product parameters, such as strand and cable diameter at the same time during ... By  Jörg Dambock
12/10/2020 – wire 2020 update

wire 2020 update

Dry cables at maximum speed

Siebe Engineering launches a new cable drying system for production speeds over 1,500m/min at “wire”. By  Jörg Dambock
Trolley.jpg

© August Strecker

 
12/10/2020 – wire 2020 update

wire 2020 update

Customer-specific complete solutions in welding technique

Newly displayed at the booth of August Strecker is control “V30 Smart”, the latest development of the successful predecessor “V20” which in addition appears ... By  Jörg Dambock
MU-16-F.jpg

The shears line offers a full range of portable tools for cutting, straightening or bending of metal wire. © Tramev

 
12/10/2020 – wire 2020 update

wire 2020 update

Shears, welding machines, coil lifting systems and more

Tramev proposes itself to the metal wires, wire ropes and wire derivatives manufacturers, both as a supplier of new standard or special accessories and ... By  Jörg Dambock
Butt-welding.jpg

Tramev welders are able to weld cables up to 39mm. © Tramev

 
12/10/2020 – wire 2020 update

wire 2020 update

Tramev launches a new series of butt welding machines

Tramev developed an extensive range of manual and automatic butt welders. Compared to the previous series, the H-Line is a new generation butt welding ... By  Jörg Dambock
Hygiene-Video.jpg

A video shows the hygiene concept of Messe Dusseldorf. Take a look https://bit.ly/2G5eU72. © Messe Düsseldorf

 
23/09/2020 – Decision in favour of Trade Fair from 7 to 11 December

Decision in favour of Trade Fair from 7 to 11 December

IWMA and WCISA endorse the dates

From 7 to 11 December 2020 “wire” and “Tube” 2020, the No. 1 trade fair for the wire and tube industry, will open its doors at the Dusseldorf Exhibition ... By  Jörg Dambock
Stefan-Plaggenborg-.jpg

“Instead, we are inviting to an in-house exhibition in spring 2021,” states Stefan Plaggenborg, owner of the Kurre Group. © Kurre Group

 
22/09/2020 – wire 2020 update

wire 2020 update

Kurre in-house exhibition in spring 2021

Kurre and Siebe postpone their participation in the “wire” fair until 2022. “Due to the very special situation and to protect our customers and employees ... By  Jörg Dambock
Eingang-Nord-hall-89.jpg

The European umbrella organisations as well as major companies of the leading international trade fairs wire and Tube clearly speak out in favour of the trade fair dates from 7 to 11 December 2020 at Dusseldorf Fairgrounds. © Messe Düsseldorf

 
21/09/2020 – Industry and Associations stand by Trade Fair Dates

Industry and Associations stand by Trade Fair Dates

“wire” will be held from 7 to 11 December 2020

The European umbrella organisations as well as major companies of the leading international trade fairs wire and Tube clearly speak out in favour of the ... By  Jörg Dambock
Headquarter-Bremen-Germany.jpg

Meet Sikora virtually from November 17-20, 2020 instead of at “wire” . © Sikora

 
21/09/2020 – wire 2020 update

wire 2020 update

Meet Sikora virtually instead of at “wire”

After evaluating the possible scenarios, it is with much regret that Sikora has decided against participating in the “wire” show. Despite all, the company ... By  Jörg Dambock
Staebe.jpg

Böllinghaus Steel and Outokumpu, both renowned exhibitors at the fair, will not be represented in Dusseldorf. © Böllinghaus

 
21/09/2020 – wire 2020 update

wire 2020 update

Böllinghaus Steel cancels participation in “wire” and “Tube” 2020

Böllinghaus Steel GmbH will not be exhibiting at „wire” and “Tube” in Dusseldorf, the world's leading trade fair for the wire and cable industry, in December ... By  Jörg Dambock
Messegelaende.jpg

For December the organisers expect stable numbers of visitors from Europe despite the tight situation in the global economy. © Messe Düsseldorf

 
18/06/2020 – wire 2020: The world focuses on Dusseldorf

wire 2020: The world focuses on Dusseldorf

Visitors from over 100 countries expected to attend „wire“ in December

For December the organiser Messe Dusseldorf expect stable numbers of visitors from Europe despite the tight situation in the global economy. So far, one ... By  Jörg Dambock
U.jpg

Wires go through a double rotary straightener, which mechanical set-up is brought by means of a motorized and digital system. © Baudrand

 
04/05/2020

Special machine to produce U-staples

Baudrand New Tech is proud to introduce its ability to respond to special parts manufacturers needs with special equipment. Acting in the field of wire ... By  Jörg Dambock
Richten.jpg

© Eurobend

 
05/04/2020

New standards for straightening machines

Eurobend, one of the leading suppliers of straightening and cutting machines, has set another milestone in the field of rotor straightening machines with ... By  Jörg Dambock
C02-footprint.jpg

© Zeller+Gmelin

 
03/04/2020

Lubricant specialist with carbon neutral footprint

Zeller+Gmelin is officially a climate neutral location. Certified climate experts Fokus Zukunft certified the firm as a “Climate Neutral Company 2020” ... By  Jörg Dambock
UD0-Update.jpg

© Jouhsen-Bündgens

 
03/04/2020

Getting things straight

The new “Precision Cut UD0” from Jouhsen-Bündgens uses rotary straighteners to process round material, and can also cut even the thinnest wires with sensitive ... By  Jörg Dambock
Measurement-system.jpg

© Burster

 
15/03/2020

Precision measurement in the cable industry

Burster cable measurement GmbH, the German cable measurement expert company, offers an extensive range of innovative systems for all the requirements in ... By  Antje Schmidtpeter
Anlage.jpg

© Niehoff

 
12/03/2020

New generation of multiwire drawing lines

Maschinenfabrik Niehoff, one of the leading manufacturers of machinery for the wire and cable industry, will be exhibiting at the wire 2020 under the exhibition ... By  Jörg Dambock
Mass.jpg

© Isend

 
10/03/2020

Powerful technology for Non-Destructive Testing

Eddy currents are a powerful technology for Non-Destructive Testing (NDT) to check the surface quality of metallic long products. Most of existing applications ... By  Jörg Dambock
Bending-machines.jpg

© Oscam

 
10/03/2020

New stirrup bending and mesh bending machines

Oscam, manufacturer of cutting and bending machines for reinforced steel process, at “wire” fair 2020 will introduce some new stirrup bending machines ... By  Jörg Dambock
17/02/2020

Double twist stranding machine

Eurodraw Wire Equipment will be present at “wire” with ;two types of equipment: The first one is a large wire drawing machine that implements the latest ... By  Jörg Dambock
Federwinden.jpg

© Fortuna Federn

 
17/02/2020

Spring coiling machines with up to 15 axis

Fortuna Federn GmbH will present on over 230 square meters (2,500 square feet) almost all their products in working conditions. By  Editorial staff
Pulverbechichtung.jpg

© Bardowick

 
13/02/2020

Powder coating machines

Maschinenbau Bardowick GmbH has been producing powder coating machines with and without electrostatics for worldwide use in the cable and rubber industry ... By  Jörg Dambock
Rayex-S-XT.png

© Zumbach

 
11/02/2020

In-line measurement and control equipment

Zumbach will use the “wire” 2020 to showcase the most modern and advanced non-contact measuring technologies for dimensional measurements of all type of ... By  Jörg Dambock
opti-s.jpg

© Lüling

 
11/02/2020

Newly developed surface quality “Opti-S”

Lüling will show their newly developed surface quality “Opti-S” in Dusseldorf. The name “Opti-S”, comes from “optimal surface” and is an innovative opportunity ... By  Jörg Dambock
Taping-line.jpg

© Lukas Anlagenbau

 
09/02/2020

Horizontal taping machine

With a new drive concept, Lukas ensures a further improvement of quality in the taping technology.At “wire” Show Duesseldorf 2020, a horizontal Taping ... By  Jörg Dambock
Verseilmaschine.jpg

© Leoni

 
08/02/2020

Upgrade on cage stranding machine

Increasing cost pressure and higher quality demands are forcing cable manufacturers to operate existing production systems more efficiently. Leoni Elocab ... By  Jörg Dambock
Draht.jpg

© Suzuki Garphyttan

 
07/02/2020

Historic steel company seeks new strategies

Suzuki Garphyttan is the industrial company that focuses the energy on its leaders and employees. With an open dialogue and participation, the international ... By  Jörg Dambock
Mesh-welding-machine.jpg

© Eurobend

 
07/02/2020

Flexible coil-fed mesh welding line

The new “PL AKK” welding line has set new standards in mesh production. This new, innovative design eliminates all idle times and increases significantly ... By  Jörg Dambock
Werk.jpg

© AGST

 
06/02/2020

Stainless steel wires by AGST

AGST Draht+Biegetechnik is one of Europe’s leading supplier for stainless steel wires. The German company is especially focused on grades with good bending ... By  Jörg Dambock
Smart-factory.jpg

© IT Engineering

 
06/02/2020

With MES to the smart wire factory

Everyone is now talking about digitisation and is aware of the benefits it brings. However, many manufacturing companies are hesitant to actually address ... By  Jörg Dambock
Coil-winder.jpg

© Collari

 
06/02/2020

Coil winder and static decoiler

Collari will be presenting at “wire” Coil Winder mod. “BAU180E” and the Static Decoiler mod. “SV2”. The coil winder is a simple to use machine for turn ... By  Jörg Dambock
Montage.jpg

© Otto Bihler

 
06/02/2020

Wire bending parts fully digitized

At the “wire” 2020, Bihler will present the efficient production of a wire bending part on the GRM-NC servo stamping and forming machine with a radial ... By  Jörg Dambock
Lubricants.jpg

© Traxit

 
05/02/2020

Complete range of lubricants for wire drawing

Traxit provides the wire drawing industry with a complete range of lubricants to suit all types of wire for all applications. From simple beginnings in ... By  Jörg Dambock
bm-36-HS-wafios.jpg

© Wafios

 
04/02/2020

All under one roof

For the first time in the history of Wafios, the company will present wire and tube bending machines together in hall 10 on an expanded exhibition area. ... By  Jörg Dambock
Subseacable.jpg

© Cimteq

 
31/01/2020

Designing fit-for-purpose cable

For anyone who is new to the cable industry, it can be difficult to navigate. There are, quite literally, hundreds of variations of cables. Advising customers ... By  Editorial staff
Powder.jpg

© Rolf Schlicht

 
30/01/2020

Powder coating machines

In addition to the own brands RS “Powdertech” and RS “Multicut”, a wide range of machines for the rubber and plastics industry from various well-known ... By  Jörg Dambock
rotary-wire.jpg

© Jouhsen-Bündgens

 
21/01/2020

Full range of rotary wire straightening products

Jouhsen-Bündgens to showcase its full range of rotary wire straightening products at “wire”.The company will present a selection of components produced ... By  Editorial staff
Cable.jpg

© Tape Former

 
21/01/2020

Tape Formers will be exhibiting at “wire”

Tape Formers LTD will be exhibiting at “wire”. Chris, their new Tape Former apprentice, will be joining Ashley, Adam and Robert. By  Editorial staff
roll-mill.jpg

© Invimec

 
20/01/2020

Wire multi-stand rolling mill “EFFE” series

Invimec is specialized in cold rolling mill and forming solutions. Winning tool of the company is the total modularity of the single and multi-stand rolling ... By  Jörg Dambock
Capstan.jpg

© M+E

 
16/01/2020

Pay-offs and take-ups for steel

The Macchine+Engineering S.r.l. (M+E) has its headquarters in Dervio, on lake Como, about 40 miles north of Milan. M+E specializes in the design and manufacturing ... By  Jörg Dambock
Winder.jpeg

© Mathiasen

 
15/01/2020

Buying and selling secondhand machinery

Mathiasen Machinery, Inc. (MMI) will be showcasing all types of new and used wire and cable machinery. MMI has been buying and selling secondhand machinery ... By  Jörg Dambock
Rollringgetriebe.jpg

© Uhing

 
15/01/2020

Rolling ring drive ready for Industry 4.0

Uhing is the synonym for continuous development and innovation. This has been so for nearly 70 years. As early as in 1952, the company founder Joachim ... By  Editorial staff
cable.jpg

© Rosendahl-Nextrom

 
15/01/2020

Here for you

Commitment, transparency and technological (r)evolutions will be the core topics of Rosendahl and Nextrom’s presentation even more than before. All combined ... By  Jörg Dambock
Mesh-welding.jpg

© Clifford

 
15/01/2020

High-speed grating

Clifford’s grating welders have the ability to weld a variety of crosswire diameters and line bar thicknesses. Welding capabilities range from light grating ... By  Jörg Dambock
ETC.png

© Eder Engineering

 
14/01/2020

Drawing die-tool working machines

Offering innovative and high value added concepts with over 70 years of expertise in the field of reconditioning die working equipments, Eder-Austria is ... By  Jörg Dambock
Anlage.png

© Lamnea Bruk

 
10/01/2020

Twist-free and straight wire over decades

Lämneå Bruk is a family-owned, long-standing manufacturer of wire machinery with a proven track-record of more than 100 years’ experience in the industry. ... By  Jörg Dambock
SM-Concept.jpg

© Witels-Albert

 
09/01/2020

Less is more

The handling, productivity and value retention of components for straightening process materials are of essential importance. The saving of resources and ... By  Jörg Dambock
Extrusionsanlage.jpg

© Kurre

 
09/01/2020

Complete extrusion lines for customers worldwide

During the last two years, the Kurre group designed, built and installed 12 complete extrusion lines for customers worldwide. One of the largest and most ... By  Jörg Dambock
Bolts.jpg

© Videx

 
21/10/2019

New hot forging line

Videx has launched a new “Hot Forging line” which consists of six to ten machines. This line replaces the traditional separate forging presses and trimming ... By  Jörg Dambock
rigid-strander.jpg

© Pourtier

 
03/04/2019

Large rigid cage strander line

The Pourtier Company, part of the Sampsistemi Group, has recently completed the installation of a large rigid cage strander line of about 100m long at ... By  Jörg Dambock