Reports

Ein Highlight der 2019er Hausmesse ist das „Twister²“-Fertigungskonzept. Ein Roboter ist hier über das Programmiersystem „WPS3 Easy Way“ für Handling-Aufgaben steuerbar. © Wafios

01/04/2019

World firsts for the wire and tube forming industry

In 2019, the Wafios Group organises once again an in-house exhibition at the premises of Wafios Umformtechnik in Wuppertal/Germany. The twelfth edition ... By Editorial staff

01/04/2019

Arlenico starts wire rod production with “Meerdrive Plus” block

Arlenico produces special grades of wire rod with a four-stand “Meerdrive Plus” block from SMS. The plant had immediately met the specified tolerance of ... By Editorial staff

28/03/2019

Schaeffler has taken over Elmotec Statomat Holding

Global automotive and industrial supplier Schaeffler has acquired Elmotec Statomat Holding GmbH. The manufacturer of production machines for the construction ... By Editorial staff

26/03/2019

New possibilities in the production of ram piles

The goal was no less than to produce the baskets of his construction piles fully automatically. Swedish company Skanska found advice, deeds, know-how and, ... By Editorial staff

22/03/2019

New control system to boost welding performance

With protected power supply, five standard measuring channels, single inverter and servo axis controller, the “B 20K” welding control system boasts new ... By Editorial staff

03/03/2019

Induction annealed tubes for the most demanding tasks

In order to cover the increasing demand for longitudinally welded, induction annealed stainless steel tubes in the long term, German Schoeller Werk has ... By Editorial staff

01/03/2019

Cold forming reaches record breaking throughput

A new type of all-in-one machines turns out 100 full-thread screws per minute with a length of 300mm length and 10mm outside directly from the coil. In ... By Editorial staff