Reports

Hairpin-Tester.jpg

The “HVC 360 SA” with a wide range of electrodes. © DSE

 
29/03/2021 – Booming market for E-motors requires new test equipment

Booming market for E-motors requires new test equipment

Tester for hairpins used in E-motors

The new “HVC 360 SA” High Voltage Continuity Tester can be integrated in the production line as a separate Stand-alone operating unit. By  Jörg Dambock
2sq-series.jpg

2 SQ series header. © Asahi Sunac

 
26/03/2021 – Changing of wire material for forming

Changing of wire material for forming

“Fine” technologies brighten forming industry

Asahi Sunac Corporation in Japan has continuously developed various advanced technologies for “forging machine and tooling” since 1959 (formerly as Asahi ... By  Jörg Dambock
Gonzalres-Villar.jpg

Electronic CVT drive system vs. single drive system. © Unternehmerschaft Düsseldorf und Umgebung e.V.

 
25/03/2021 – Continuously Variable Transmissions (CVT)

Continuously Variable Transmissions (CVT)

Saving energy with networked CVT

Electric drive technology is one of the most widespread industrial technologies. This article from Kabel.Consult.Ing discusses how intelligent digital ... By  Jörg Dambock
Richten.jpg

Roller box “RC 10”. © Witels-Albert

 
24/03/2021 – Wire processing / straightening

Wire processing / straightening

Expert knowledge and reliable products

For decades, the Berlin-based Witels-Albert GmbH has focused on the development, manufacture and supply of innovative products and services for wire processing. By  Jörg Dambock
Sheat-alu.png

A pair of extrusion wheels drive four feedstock rods into chamber to form the sheath coating on the outer side of the cable © Dalian

 
23/03/2021 – Dalian Konform develops “SSLB500” for Furukawa

Dalian Konform develops “SSLB500” for Furukawa

New process for aluminum sheathing of HV power cables

Dalian Konform recently developed “SSLB500” for Shenyang Furukawa, using four feedstock rods to extrude aluminum sheathing for HV power cables. By  Jörg Dambock
Profildrahtwalzen.jpg

In multi-stage rolling processes it is necessary to measure and calibrate right after the pre-rolling stages. © Fuhr

 
22/03/2021 – With integrated measurement system analysis (MSA)

With integrated measurement system analysis (MSA)

Inline measurement system “F-MAS 5.0”

As a manufacturer of rolling mills, Fuhr is constantly being challenged by increasing demands on the finished wire’s geometric precision. Accuracies of ... By  Jörg Dambock
Gitterrinnen.jpg

Beginning with the automated wire loading for longitudinal and cross wires, the wire distances in the feed area are adjusted 100% automatically with servo technology. © Ideal-Werk

 
18/03/2021 – Wire processing / joining / welding

Wire processing / joining / welding

New generation of machines for mesh cable trays

Two months after commissioning, the new production line “Ideal FSD 092” wire has surpassed the expectations of customers and developers. With this innovation ... By  Jörg Dambock