Products

“Ultra-Mix” one-step process compounding unit. © E-Xhead

14/05/2021 – E-Xhead presents new patented product

E-Xhead presents new patented product

“Ultra-Mix” one-step process compounding unit

Traditional XLPE cables are produced with ready-made compounds from various suppliers. These compounds have predefined recipes of base LDPE, Silane or ... By Jörg Dambock

Thanks to its formulations, Delta Tecnic's conductive compounds meet the requirements of European ATEX regulations. © Delta Tecnic

13/05/2021 – Semi-conductive or permanent dissipative PVC compounds

Semi-conductive or permanent dissipative PVC compounds

Delta Tecnic improve safety in electrically charged environments

Delta Tecnic, a specialized company in the production and commercialization of colour concentrates and raw materials for plastics and cables is committed ... By Jörg Dambock

“Compeo 176” in cascade configuration for compounding plasticized PVC at up to 12.5 metric tons/hour. © Buss

12/05/2021 – PVC compounding systems

PVC compounding systems

Buss optimises “Compeo” series

Buss’s modular “Compeo” plasticized PVC compounding systems are now also available in a cascade configuration for optimum results. The discharge and pelletizing ... By Jörg Dambock

Dupont “Multibase MB25-502” masterbatch can optimize processability of highly mineral-filled polyethylene compounds for wire and cable applications. © DuPont

07/05/2021 – Silicone masterbatches for thermoplastics

Silicone masterbatches for thermoplastics

DuPont rebrands as “Multibase”

DuPont has rebranded its full portfolio of silicone-based masterbatches for thermoplastics as “Multibase” products. The brand name applies to all legacy ... By Jörg Dambock

Controle Mesure Systemes also designs opening Eddy Current probes that allow direct insertion into the production line. © Controle Mesure Systemes

19/04/2021 – Non-Destructive Testing systems

Non-Destructive Testing systems

Control of wire and parts with small diameters

Controle Mesure Systemes is a French company that has been designing and manufacturing Non-Destructive Testing systems for nearly 35 years. Specialized ... By Jörg Dambock

01/04/2021 – Force Testing

Force Testing

Flexible Chatillon “CS2” series

Accuracy, repeatability, and documentation of results are important factors when applications and raw materials undergo force testing. The ideal test ... By Jörg Dambock

The Cometo “MTF66” two-dimensional bending machine with a chamfering system is suitable for processing material with a diameter from 0.8mm to 6.0mm. © Cometo

19/03/2021 – Wire bending

Wire bending

Two-dimensional bending machine “MTF66”

The Cometo “MTF66” two-dimensional bending machine with a chamfering system is suitable for processing material with a diameter from 0.8mm to 6.0mm and ... By Jörg Dambock