Content

On our own account - WIRE

Review of the industry - week 17/2024

At this point, we present the five most read articles of the past week. The ranking is based on your click behavior on the website. By Daniel Keienburg

Key technologies wire, cable and tube and pipe remain system-critical

Record trade fairs face economic challenges

What a great trade fair season! With 1,500 exhibitors from 60 countries on 67,400 square metres the biggest wire in its almost 40-year Düsseldorf success story; and Tube with around 52,200 square metres and 1,200 exhibitors from 54 countries that now increasingly looks to ... By Jörg Dambock

“wire 2024”

What a great trade fair season!

The desire for personal exchange in these – economically and geopolitically – difficult times was clearly noticeable and the DRAHT/WIRE team was there to catch the best impressions for you. By Antje Schmidtpeter

Casting / Copper

New “RIC 400” model, break-ring, continuous casting technology

At “wire 2024”, Rautomead introduced their new “RIC 400” model, break-ring, continuous casting technology which has been developed to process cobalt alloy, nickel alloy and iron alloy wire rods from 2.5mm to 50mm diameter. By Jörg Dambock

Current contents

PWM will exhibit its range of manual cold welding machines, including the popular M101 model, at “Wire Expo 2022”. © PWM

25/04/2022 – Presented by Joe Snee Associates

Presented by Joe Snee Associates

Manual cold welders

PWM will exhibit its range of manual cold welding machines, including the popular M101 model, at “Wire Expo 2022”. The products will be presented by Joe ... By Jörg Dambock

The Videx chamfer system allows short parts to be chamfered, down to 90mm long. © Videx

22/04/2022 – Straightening and cut-off machines

Straightening and cut-off machines

Straighten, cut and chamfer

Videx manufactures straightening and cut-off machines for both short and for long cut lengths. By Jörg Dambock

The conference and exhibits open at the Hyatt Regency Dallas, Dallas, Texas, USA, June 7-8, 2022. © WAI

21/04/2022 – WAI’s Operations Summit and “Wire Expo” 2022

WAI’s Operations Summit and “Wire Expo” 2022

Clear path for today’s wire makers

The Wire Association International (WAI), Inc. reports that the presentations and tone of its Operations Summit & Wire Expo will follow the theme “Rising ... By Jörg Dambock

The “Chinaplas” Virtual Show 2022 shall be held on 25 May – 14 Jun, 2022. © Adsale Exhibition

21/04/2022 – Organizer is pleased to announce “Chinaplas Virtual Show 2022”

Organizer is pleased to announce “Chinaplas Virtual Show 2022”

The 35th “Chinaplas” is postponed to April 17-20, 2023 in Shenzhen

The 35th “Chinaplas” has been postponed in view of the latest Covid development and further tightening of pandemic control measures in Shanghai and other ... By Jörg Dambock

ABB Tenova innovative EAF charging melting and electromagnetic stirring solution at Acciaieria Arvedi. © Tenova

20/04/2022 – ABB and Tenova receive final acceptance

ABB and Tenova receive final acceptance

Charging, melting and electromagnetic stirring solution

ABB and Tenova receive final acceptance for innovative charging, melting and electromagnetic stirring solution on a large electric arc furnace (EAF). By Jörg Dambock

Peter ter Horst, CEO of Teijin Aramid: "I am proud of our EcoVadis Gold status. It acknowledges our progressive efforts in fair and sustainable business.” © Teijin Aramid

19/04/2022 – Awarded for the sixth time in a row

Awarded for the sixth time in a row

Teijin Aramid awarded “Eco Vadis Gold status” on sustainability

Eco Vadis has prolonged Teijin Aramid's Gold status in the sustainability rating. For the sixth year in a row, the independent and objective assessment ... By Jörg Dambock

Manfisadraws pure aluminium and aluminium alloys in a variety of diameters from 0,75mm to 13,50mm. © Manfisa

19/04/2022 – New Division: “Manfisa Welding Products”

New Division: “Manfisa Welding Products”

Specialised in aluminium wire-drawing and casting

Manfisa Wire S.L. is a Spanish company specialised in aluminium wire-drawing and casting since 1973, and the experience gained has enabled them to develop ... By Jörg Dambock

Topics

Digital Issue 02/2024

WIRE 2/2024 - the main-fair issue “wire 2024”
From 15 to 19 April the industry will be presenting new machines, technologies and trends expected for the coming years. WIRE shows the highlights in advance.
According to Messe Düsseldorf, the organisers, 1,464 exhibitors from 62 countries have registered for “wire 2024”. Over 67,400 square metres net have been sold in exhibition halls 9 to 17. Together with the “Tube” fair taking place in parallel, around 2,600 exhibitors will be displaying industry news and trends in an area of over 119,000 square metres. On the subject of the fastener area, the current edition of WIRE includes a special section in English of our German-language magazine “Umformtechnik Massiv+Leichtbau”, under the title “Forming Technology solid forming+lightweight construction”. WIRE magazine will be on show at “wire” with its own stand in hall 9, booth C 03. Come and see us at the end of your day at the fair – we look forward to an exchange of views with exhibitors and trade visitors. Your WIRE team