1. Top-Themen:
  2. Draht
  3. Wire
  4. Blech Rohre Profile
  5. Massiv + Leichtbau

quality management

Surface-treatment.jpg

The interior of the compact camera box showing the high-speed CCD line scan camera and the mirror section. © Futec

 
07.03.24 – Quality management

Quality management

100% online wire and cable surface inspection system

At “wire 2024” Futec Europe will show an optoelectronic 100% online wire and cable surface inspection system using only one CCD line scan camera. Von  Jörg Dambock
MV-cable.jpg

Cable cross section. © BASEC

 
29.02.24 – A technical view of the importance

A technical view of the importance

Medium Voltage (MV) cable testing

For medium voltage cables, testing is even more critical than low voltage counterparts due to the design's complexity and ensuring the highest level of ... Von  Jörg Dambock
Purity-scanner-10-years.jpg

With the “Purity Scanner Advanced”, the pellets are conveyed to the inspection area via a stainless steel vibrating chute. © Sikora

 
09.01.24 – No chance for contamination with inspection and sorting technology from Sikora

No chance for contamination with inspection and sorting technology from Sikora

Pure material, best quality – 10 years “Purity Scanner Advanced”

In 2013 Sikora launched with the “Purity Scanner” a new type of technology on the market that differed significantly from existing technologies. Von  Jörg Dambock
DMS-M-drawing-die-measuring.jpg

The “DMS-M” is equipped with one measuring lens, with a choice of 5 lenses depending on the drawing die diameter range, that has to be measured. © OEG

 
29.12.23 – Quality management / drawing dies

Quality management / drawing dies

“DMS-M” drawing die measuring system

OEG GmbH Germany has been known as a manufacturer of drawing die geometry measuring devices for many years. Recently, customers have been asking for a ... Von  Jörg Dambock
4D-Eagle-S-.jpg

The “4D Eagle S” comes as a comprehensive solution for surface inspection and profile measurement. © Kocks

 
27.12.23 – New generation of laser-based measuring systems

New generation of laser-based measuring systems

Kocks and LAP announce far-reaching strategic alliance

Kocks Measure+Inspect and LAP Measurement Technology have announced a far-reaching strategic cooperation. The cooperation includes the joint development ... Von  Jörg Dambock
Gi-100DT.png

Dimensional Inspection: The “Gi-100DT” comes standard with three cameras, one from the side, one from the bottom and one from the top. © General Inspection

 
18.12.23 – Quality management

Quality management

General Inspection installed another “Gi-100DT”

General Inspection, LLC Davisburg, MI/USA installed another “Gi-100DT” inspection system, this time in California, for a manufacturer of precision aerospace ... Von  Jörg Dambock
monitoring-of-material-flow.jpg

Installation of the sensor in the neckpiece. © Woywod

 
16.11.23 – Cable manufacture / Dosing

Cable manufacture / Dosing

Monitoring of material flow

Woywod reports on the monitoring of the material flow for different granules in shape, colour, grain size, quantities at the outlet of the dosing unit ... Von  Jörg Dambock