In order to achieve these specifications reliably, economically and sustainably, cleaning processes and systems that are optimally adapted to the task at hand are required.

Whether in the automotive and transportation sectors, in traditional mechanical and plant engineering, energy technology, the production of construction and agricultural machinery, the manufacture of medical devices for diagnostics and therapy or consumer goods and other industrial sectors, the requirements for component cleanliness have increased enormously in recent years. This also includes fasteners. Even the smallest particles and/or minimal film residues on the surfaces can impair the results of subsequent processes, such as coating, heat treatment or corrosion protection, and disrupt the long-term, flawless functioning of individual parts or complete systems.

In order to avoid this, limit values are increasingly being set for fasteners for the amount of particulate and film contamination still permitted on the component surface, also known as ‘residual dirt’. In terms of particle cleanliness, these can be specifications such as "no particles larger than 200µm", the maximum number of permissible particles in a size class or a weight-based (gravimetric) determination of the amount of residual dirt. Specifications for filmic cleanliness are often given in the form of surface energy or surface tension (e.g. mN/m = millinewtons per meter). In the case of fasteners for high-tech areas, including high-vacuum technology, semiconductor production equipment and medical technology, individual specifications or factory standards, such as outgassing rates, are usually added.

Typical cleaning challenges
In addition to the cleanliness specifications to be met, there are various other challenges when cleaning connecting parts. These include different materials such as steel, stainless steel, aluminum, titanium, non-ferrous metals, plastics and composite materials as well as the sometimes very complex geometries of the parts. In addition, the screws, nuts and other parts come into contact with various machining media during the manufacturing process, which generates particles and abrasion. They leave residues on the surface that can accumulate to form a mixture that is difficult to remove or, like some special lubricants (e.g. Molycote), is inherently difficult to clean off. Cleaning, which is usually carried out as bulk material, often results in high weights and dense packings. Small fasteners in particular are difficult to clean and dry. High throughputs, short delivery times and sometimes low margins are further aspects.

In order to achieve the required cleanliness in a stable, efficient and sustainable manner and to master the other challenges economically, comprehensive know-how about the various cleaning technologies as well as knowledge about the applications and the physical relationships are required. As an experienced full-service provider of future-oriented solutions for industrial component cleaning and surface treatment, Ecoclean has both. This guarantees cleaning solutions that are designed and equipped to meet requirements and with which defined cleanliness specifications up to the highest demands in ultra-fine cleaning can be reliably achieved.

Selection of the optimum cleaning process
Fasteners are usually cleaned as a batch in wet-chemical processes. The following factors must be taken into account: Material, size, geometry and weight of the component, type and amount of contamination, downstream process and resulting cleanliness specifications as well as throughput requirements. On this basis, it can be determined whether the adhering contaminants can be removed most effectively with a water-based cleaner, an environmentally compatible solvent or modified alcohol with lipophilic and hydrophilic properties. This information also makes it possible to define the most suitable process engineering and drying technology. Several cleaning steps are often required due to the different processing media used in the various manufacturing steps such as pressing, rolling or heat treatment.

Correct system and process technology minimizes cleaning costs
Cost-efficient and compact chamber systems that work under full vacuum when using solvents and have appropriate systems for media preparation are state of the art for cleaning connecting parts. The batch capacity ranges up to lattice boxes. If a large variety of materials, very high throughput requirements or the cleanliness specifications to be achieved during final cleaning make the use of a chamber system unfeasible, modular ultrasonic multi-bath immersion systems such as the “UCM Smart Line” are available. Thanks to modules with integrated electrical and control technology for the cleaning, rinsing, drying, loading, and unloading process steps as well as a flexible transport system, it can be easily adapted to the respective task.

To keep the costs per cleaned component as low as possible, the systems are equipped with various application-specific process technologies, for example for spray, high-pressure, immersion, ultrasonic and plasma cleaning, steam degreasing, injection flood washing, Pulsed Pressure Cleaning (PPC) or Ultrasonic Plus and, if required, for passivation/preservation of the parts. In combination, these processes make it possible to influence both the cleaning result and the cleaning time for specific components. For densely packed bulk material batches and complex components, spray processes and injection flood washing with adjustable pressures of up to 16 bar also ensure significantly improved results and shorter process times for solvent cleaning processes. Pressure change processes such as PPC or Ultrasonic Plus, in conjunction with aqueous or solvent immersion cleaning, enable contaminants to be removed reliably and quickly from small cavities. By combining processes in one cleaning system that would otherwise require several systems, such as solvent or aqueous batch cleaning with a subsequent low-pressure plasma process, the component surface can be prepared effectively and efficiently for subsequent coating, among other things.

Monitoring of validated process parameters
Whether in a chamber or ultrasonic multi-bath immersion system, the cleaning of fasteners for high-tech applications is often based on validated process parameters, compliance with which must be monitored and documented. These include the ultrasonic frequency and power. The “Acoustic Performance Measurement” (APM) systems from Ecoclean GmbH provide a solution for this task, with which measurements up to an ultrasonic frequency of 2,000kHz can be carried out inline and reproducibly. Monitoring is carried out using a condenser or laser-acoustic microphone, which is aligned with the surfaces of the ultrasonically equipped cleaning and rinsing tanks of a multi-bath immersion system. The measurements are thus carried out without movement or contact, ensuring the reproducibility of the results. In addition, “APM” technology makes it possible to detect ultrasonic frequency and sound pressure through “walls”. It can therefore also be used in closed cleaning and rinsing tanks as well as chamber cleaning systems. Analysis, evaluation, and storage of the recorded data are carried out by the measuring system software.

Test Center for process development and design
The best way to determine which system and process technology is optimal for the respective task in terms of cleanliness and cost-effectiveness is to carry out cleaning tests with originally contaminated components. Ecoclean has extensively equipped test centers worldwide for this purpose, which enable tests to be carried out under near-production conditions.

SBS Ecoclean Group
Savignystrasse 43
60325 Frankfurt am Main
Germany
Contact person is Kathrin Gross
Tel.: +49 711 7006-223
kathrin.gross@ecoclean-group.net
www.ecoclean-group.net
 

About SBS Ecoclean Group
The SBS Ecoclean Group develops, produces and sells future-oriented plants, systems and services for industrial component cleaning and surface treatment as well as customized automation solutions. Another business area is the development and series production of efficient alkaline electrolysis systems for the decentralized production of green hydrogen. Innovation is driven by the two competence centers based in Germany, which support the global Group companies with technical expertise, research and pioneering developments. The cleaning solutions, which are world leaders, help companies from a wide range of industries such as mechanical engineering, the semiconductor supply industry, precision optics, medical technology, the automotive and supplier industry, micro and precision engineering, aerospace and fastening technology around the globe to produce efficiently and sustainably with high quality. Ecoclean's success is based on innovation, cutting-edge technology, sustainability, customer proximity, diversity and respect. The group of companies combines the “Ecoclean”, “UCM” and “Mhitraa” brands. It has eleven production sites in Germany and eight other countries worldwide and employs around 900 people.