Content

Indian Metal trade fair quartet in Mumbai

Highly anticipated

From 27 to 29 November 2024 the Bombay Exhibition Centre in Mumbai will become the regional hotspot for the global players in the metal industry. The exhibition halls are fully booked. Over 600 international exhibitors from 21 countries will display the technological innovations ... By Jörg Dambock

Werma expands signal tower range with new “RST” product line

Modern design meets optimum functionality

The new “RST” LED signal tower range from Werma impresses with its modern, sleek appearance, outstanding performance and versatile application options. By Jörg Dambock

Strong, precise, and indestructible: CSS Belts

Conveyor technology for extreme conditions

Whether it’s heavy loads, extreme heat, freezing cold, or corrosive acids – “CSS Belts” conveyor belts hold up. The meshes, fabrics, and spiral conveyor belts excel wherever the toughest demands are placed. By Jörg Dambock

Nexans and Niehoff partner to develop, install and operate

First next-generation rod breakdown line

Niehoff, one of the world’s leading supplier of wire processing equipment, partners with Nexans, a leader in the design and manufacturing of cable systems and services, to develop and install the first next-generation of rod breakdown lines in operation in the Group’s factory ... By Jörg Dambock

Current contents

Padanaplast manufactures a range of “Cogegum GFR” T4 (150°C) and T3 (125°C) grades and “Polidiemme G” elastomer grades specifically developed for automotive wires and cables.. © Padanaplast/AdobeStock

22/11/2021 – High-performance wires and cables for electric vehicles

High-performance wires and cables for electric vehicles

Padanaplast offers new advanced HFFR compounds

Padanaplast specializes in crosslinkable polyolefin halogen free flame retardant (XLPO-HFFR) compounds for wires and cables and offers a range of products ... By Jörg Dambock

Condat integrates the objectives of sustainable development goals at each stage of the life cycle of its products. © Condat

19/11/2021 – “Eco Vadis”: Corporate Social Responsibility platform

“Eco Vadis”: Corporate Social Responsibility platform

Condat receives the “Platinum Medal Eco Vadis”

Condat, an international specialist in industrial lubricants for more than 165 years, has been awarded “Platinum” on the Eco Vadis Corporate Social Responsibility ... By Jörg Dambock

Setic and Pourtier launched their new website at www.setic-pourtier.com. © Setic/Pourtier

18/11/2021 – Designer and manufacturer of cable rotating machines

Designer and manufacturer of cable rotating machines

Setic and Pourtier launch new website

Setic and Pourtier, well-known designer and manufacturer of cable rotating machines, are thrilled to announce the launch of their new website at www.setic-pourtier.com. ... By Jörg Dambock

While tungsten electrodes are frequently used in welding, their structure, sharpening and alloy have a previously underestimated influence on consistently good product results in TIG welding. A reproducible weld seam is only possible if the electrode quality and geometry are outstanding. © Society for Wolfram Industrie mbH

17/11/2021 – Orbital welding

Orbital welding

Efficient electrode selection and preparation

Quality pays off: For example, nobody would equip a Formula 1 racing car with inexpensive all-weather tyres. In order to achieve a competitive speed, the ... By Jörg Dambock

The Precision Cut MJC series was developed for straightening and cutting straight and right-angled sections of wire and pipe without burrs and in large quantities. © Jouhsen-Bündgens

16/11/2021 – For short steel and stainless steel sections

For short steel and stainless steel sections

Burr-free straightening and cutting whether straight or angled

“Precision Cut MJC” is a series of straightening and cutting machines that can straighten and cut short, straight and angled sections without any burrs. By Jörg Dambock

(l-r) Michelle Nichols, Angus Hogarth, Steve Gencarella and Tom Mander. © AWI

15/11/2021 – On our own behalf - Wire

On our own behalf - Wire

Week 45/2021 in retrospect

Here, we present you the top articles from our four categories. This week, the most read one comes from the category „Business“. By Daniel Keienburg

“Through this acquisition we will continue to build on our market presence in the industrial north of Italy”, said Vagner Rego, Business Area President Compressor Technique. © Atlas Copco

12/11/2021 – New part of Compressor Technique Service division

New part of Compressor Technique Service division

Atlas Copco acquired Italian compressed air distributor

Atlas Copco has acquired S.T.E.R.I. srl (STERI), an Italian compressor distributor and service provider located in the Turin area. By Jörg Dambock

Topics

Digital Issue 04/2024

As part of the ‘Metalflow Alliance’ of Messe Düsseldorf, the 9th ‘wire India’ is to be held in Mumbai, India from 27 to 29 November. Some 400 exhibitors from 21 countries exhibited at the last ‘wire, Tube and Metec India 2022’, occupying about 20,000m² of exhibition space.
WIRE issue 4/2024 shows some exhibition highlights in advance. Roughly 17,350 visitors attended the trade show during the three exhibition days. As in 2022, the 2024 trade fair will again take place at the Bombay Exhibition Centre (NESCO). The Metal trade fair quartet, comprising ‘wire India’, ‘Tube India’, ‘Metec India’ and ‘India Essen Welding+Cutting’, features 600 exhibitors from 21 countries across more than 38,000m2 of exhibition space.
We wish you an enjoyable read! Your WIRE team