21/06/2021 – Trouble-free and calibrated

Kurre length measurement “MW50”

Kurre Systems has redesigned the length counter for wires, cables, profiles, tubes and filaments. From now on, the new model “MW50” replaces the previous measuring track “MW5”.

Length-measurement.jpg

Kurre Systems has redesigned the length counter for wires, cables, profiles, tubes and filaments. © Kurre Systems

 

The “MW50” is characterised by many improvements. For example, signal exchange now takes place via a serial interface in full duplex mode. This means that data can be sent to the control system almost in real time. A line filter is integrated into the counter as standard, so that measurement errors through outer electronic interferences have been completely eliminated. In addition, the new caterpillar has improved handling features, e.g. when placing the product on the caterpillar. Depending on the requirements, the Kurre Systems length measurement MW50 is pre-calibrated and thus can be certified for the measurement of sales goods. Products with a diameter of 1mm to 50mm and a maximum winding speed of 600m/min can be measured. Flat products with a width and thickness of up to 37mm are also part of the measuring portfolio.

Kurre Spezialmaschinenbau GmbH
Tel.: +49 4498 9250-0
www.kurre-systems.de