Jörg Dambock

wire-parts.jpg

The product range of Novobend includes 2D and 3D bent parts. © Novobend

 
25/03/2022 – Bent parts in diameter range from 1mm to 10mm

Bent parts in diameter range from 1mm to 10mm

Wire bending at Novobend

Novobend, based in Engelskirchen in Western Germany, specialises in the production of wire bending parts made of stainless steel wire and carbon steel ... By  Jörg Dambock
RMBC-42-HD.jpg

Painted per customer specifications, the “RMBC 4.2-HD” is equipped with special technical features to allow the perfect blast cleaning of the compression springs as preparation for the subsequent coating process. To neutralize oil carried into the shot blast machine by the work pieces, the machine can be equipped with a dosing system for the application of a powder compound that catches and discharges the oil. © Rösler

 
24/03/2022 – Tumble belt blast machine for coating preparation

Tumble belt blast machine for coating preparation

Blast cleaning of springs prior to coating

Shot blasting is the most common pre-treatment technology to prepare the surface of technical springs for subsequent coating operations. In a newly established ... By  Jörg Dambock
spring-grinding-wheel.png

© Weiler

 
23/03/2022 – Weiler Abrasives experts improved the formula for Spring grinding wheels

Weiler Abrasives experts improved the formula for Spring grinding wheels

High quality grinding wheels for improved dressing adjustment

Weiler introduces more productive, consistant, and guaranteed high quality grinding wheels. Their new “Zone wheel” features the most selected corundums ... By  Jörg Dambock
FUL-226.jpg

Wafios “FUL 226”. © Wafios

 
22/03/2022 – Wafios theme for “wire” and “Tube” 2022

Wafios theme for “wire” and “Tube” 2022

“Future Forming Technology”

Finally: After several years, the “wire” and “Tube” show will once again take place live on site in Düsseldorf, Germany. “Future Forming Technology“ – ... By  Jörg Dambock
Automated-steel-analysis.png

Not a nocturnal comet shower, rather image areas (red) in the bainite phase found to be relevant by the model. © Fraunhofer IWM

 
22/03/2022 – Automated image analysis method

Automated image analysis method

On the way to fully automated steel analysis

To ensure that steel delivers what it promises, its microstructure is analyzed in detail to detect weak points during early stages. Today, this is largely ... By  Jörg Dambock
MED-Maillefer-E-Documentation.jpg

Tree structure pointing to a technical document. © Maillefer

 
18/03/2022 – Latest version of the Maillefer documentation software

Latest version of the Maillefer documentation software

Find it in “MED 3.0”

The latest version of the Maillefer documentation software is being launched, “MED 3.0”. The web-enabled documentation utility makes finding assemblies ... By  Jörg Dambock
Hydrogen-aluminium-alloys.png

Fig. 1: Tensile properties and metallographic fractography of an aluminium-based alloy with zinc, magnesium and copper after aging for 24 hours at 120°C. a) Engineering stress–strain curves of uncharged and hydrogen-charged samples. b and c) Electron imaging of an intergranular crack of the hydrogen-charged alloy subjected to tensile fracture. © MPIE

 
17/03/2022 – Research results of the Max-Planck-Institute for Iron Research

Research results of the Max-Planck-Institute for Iron Research

How hydrogen behaves in aluminium alloys

Due to its low density, high strength, and abundance, aluminium and its alloys are widely used for example in constructions, consumer electronics and for ... By  Jörg Dambock