A pair of extrusion wheels drive four feedstock rods into chamber to form the sheath coating on the outer side of the cable © Dalian
23/03/2021 – Dalian Konform develops “SSLB500” for Furukawa
Dalian Konform develops “SSLB500” for Furukawa
In multi-stage rolling processes it is necessary to measure and calibrate right after the pre-rolling stages. © Fuhr
22/03/2021 – With integrated measurement system analysis (MSA)
With integrated measurement system analysis (MSA)
The Cometo “MTF66” two-dimensional bending machine with a chamfering system is suitable for processing material with a diameter from 0.8mm to 6.0mm. © Cometo
19/03/2021 – Wire bending
Wire bending
Beginning with the automated wire loading for longitudinal and cross wires, the wire distances in the feed area are adjusted 100% automatically with servo technology. © Ideal-Werk
18/03/2021 – Wire processing / joining / welding
Wire processing / joining / welding
The turnkey upgrade for the Storfinnforsen 400/130kV electrical substation has now been fully commissioned. © Linxon
17/03/2021 – Linxon has successfully put into operation
Linxon has successfully put into operation
Aldo Kamper joined Leoni as CEO in September 2018. © Leoni
15/03/2021 – CEO of Leoni AG
CEO of Leoni AG
A team of physicists at the Technical University of Munich has developed a coil made of superconducting wires that can transmit power of more than five kilowatts contactless without major losses. © Christoph Utschick/Würth Elektronik eiSos